guide to the use of slag cement in concrete and mortar ACI 349.3R : 2018 REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES
It typically replaces part of the portland cement in concrete mixes. According to the Slag Cement Association, an industry trade group, incorporating slag cement as a supplement in concrete offers higher strength, reduced permeability and improved resistance to chemical attack.
3/5/2014 4 The Water-Cement Ratio Law For given materials the strength of the concrete (so long as we have a plastic mix) depends solely on the relative quantity of water as compared with the cement,
ACI Committee 233, Ground Slag in Concrete, decided to review the terminology relating to this material. In 2001, the slag cement manufacturers, represented by the Slag Cement Association (SCA), approached the committee and requested a change in terminology from GGBFS to slag cement.
Jul 02, 2013 · 232.2R-03 Use of Fly Ash in Concrete part 2 233R-03 Slag Cement in Concrete and Mortar part 2 234R-06 Guide for the Use of Silica Fume in Concrete part2 237R-07 Self-Consolidating Concrete part 2 238.1R-08 Report on Measurements of Workability andRheology of Fresh Concrete part 2 300—Designand Construction
Dec 04, 2017 · This video compares the performance of fly ash, slag, and silica fume on fresh and hardened properties of concrete. www.tylerley.com. ... ACI 211 – Concrete Mix Design, ...
The effect of a partial replacement of cement with slag cement on free shrinkage is evaluated for curing periods between 3 and 28 days. Mixtures include concrete containing different replacement ...
Physical aspects regarding the deterioration of OPC and slag concrete of cement slag mix ratio 85:15, 70:30 and 55:45 have been studied in plain water and seawater of salt concentration 1N, 3N and ...
proportion is dependent on the grade of slag used (ACI 233R-03). As the replacement level of slag increases the 28 day compressive strength of concrete generally increases, up to the approximately 50 percent slag as a percent of the cementitious materials (SCA No. 14, 2003).
In this paper, a critical review on the influence of slag and slag cement on the strength of sustainable concrete has been presented. The researches carried out in the past on the use of GBFS as partial replacement of cement in mortar and concrete, basically, the strength development of GBFS blended concrete and cement are reviewed in this study.
Identify the sustainable benefits of slag cement and the resources SCA has to test the different effects of mix design. Describe what is included in the ACI 233R-17 Guide to the Use of Slag Cement in Concrete and Mortar, and how to navigate the document for future slag cement related questions they may have.
Note 1: When concrete is exposed to water exceeding 15,000 ppm sodium chloride content, Type II cement shall be used. In lieu of Type II cement, a Type I cement may be used in combined form with an amount of up to 50 percent replacement with ground iron blast furnace slag, or an amount of up to 25 percent replacement with Class F fly ash.
In our area, people are discussing the benefits or disadvantages of finishing exterior concrete containing ground granulated blast furnace (GGBF) slag. One group claims that since slag is finer than portland cement, a finisher brings more fines to the surface after straight edge and floating and thus creates a less durable surface.
specifications for structural concrete: aci 233r : 2017 : guide to the use of slag cement in concrete and mortar: astm c 505 : 2015 : redline : specification for nonreinforced concrete irrigation pipe with rubber gasket joints: astm c 1577 : 2017-01 : specification for precast reinforced concrete monolithic box sections for culverts, storm ...
ACI 233R-03(2011) Slag Cement in Concrete and Mortar (Reapproved 2011) ACI 234R-06 Guide for the Use of Silica Fume in Concrete ACI 301-05 Specifications for Structural Concrete
ELSEVIER Cement & Concrete Composites Cement and Concrete Composites 21 (1999) 11-21 Durability of Portland blast-furnace slag cement concrete G.J. Osborne* 117 Turnpike Drive, Luton LU33RB, UK Received 30 March 1998; accepted 13 July 1998 Abstract This paper summarizes the results of studies carried out at the Building Research Establishment in the UK, on the perform- ance and long-term ...
American Concrete Institute, “Slag Cement in Concrete and Mortar”, Reported by ACI Committee 233, ACI 233R-03, March, 2003, 18p. 9. Concrete Institute of Australia, “Ground Granulated Iron Blast Furnace Slag and : its Use in Concrete”, Current Practice Note 26, ISBN 0 909375 62 3, November,
This report addresses the use of slag cement as a separate cementitious material added along with portland cement in the production of concrete. This report does not address slags derived from the smelting of materials other than iron ores.
Guide to the Use of Slag Cement in Concrete and Mortar ... ACI 233R-17 currently viewing ... Most Recent; ACI 233R-03 (R2011) January 2003 Slag Cement in Concrete and ...
buy aci 233r : 2017 guide to the use of slag cement in concrete and mortar from sai global
SIP 1 – Limits on Quantity of Supplementary Cementitious Materials by the NRMCA Research Engineering and Standards Committee Table 1: Limits on cementitious materials for concrete assigned to Exposure Class F3 (Table 26.4
ACI Manual of Concrete Practice Volume 2, 2016. ... 233R-03 Reapproved 2011 Slag Cement in Concrete and Mortar; ... 307-08 Code Requirements for Reinforced Concrete Chimneys (ACI 307-08) and Commentary; 308R-01 Reapproved 2008 Guide to Curing Concrete (308-213)R-13 Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight ...
blend of portland cement and granulated blast-furnace slag, portland cement and pozzolan, or portland blast-furnace slag cement and pozzolan, produced by intergrinding portland cement clinker with the other materials or by blending port-land cement with the other materials, or a combination of in-tergrinding and blending.
Also if you ave all the ACI manuals I'd check out ACI 302.1 which is the guide for concrete floor construction and ACI 201.2 which is the guide to Durable Concrete. I believe ACI 302.1recommends a w/c ratio between 0.47-0.55 for slabs. I think Mike's recommendation of 0.50 or lower seems appropriate.
More detailed information on that subject is contained in ACI 233R- 03, formerly ACI 226.1R. Document History. M 302. January 1, 2019 Standard Specification for Slag Cement for Use in Concrete and Mortars This specification covers slag cement for use as a cementitious material in concrete and mortar. The values stated in SI units are to be ...
P. Chindaprasirt, T. Cao, in Eco-Efficient Masonry Bricks and Blocks, 2015. 8.3.1 Ground granulated blast furnace slag concrete block. Granulated blast furnace slag is the glassy material formed by water quenching of molten slag discharged from the blast furnaces in the iron-making industry.
2010-10-06 · Manual of Concrete Practice 2005 ACI's Manual of Concrete Practice (MCP) is the most comprehensive concrete reference set available. It contai ... 233R-03 Slag Cement in Concrete …
2017-05-23 · Standar Nasional Indonesia tentang “Spesifikasi semen slag untuk digunakan dalam beton dan mortar” merupakan adopsi identik dari ASTM C989-10, Standard specification for slag cement for use in concrete and mortars dan merupakan revisi SNI 03-6385-2000, digunakan sebagai standar untuk menetapkan tiga tingkat kekuatan semen slag untuk digunakan
1.1 This specification covers slag cement for use as a cementitious material in concrete and mortar. Note 1: The material described in this specification may be used for blending with portland cement to produce a cement meeting the requirements of Specification C595/C595M or as a separate ingredient in concrete or mortar mixtures.
Standard Specification for Slag Cement for Use in Concrete and Mortars. 1.1 This specification covers three strength grades of slag cement for use as a cementitious material in concrete and mortar. ... More detailed information on that subject is contained in ACI 233R-03. 2.
Figure 1: Greening occurred in concrete made with slag cement after forms were removed on the Canadian Chancery in Washington, D.C. Figure 2: Exposure to sunlight and air allowed the concrete surface at the Canadian Chancery to oxidize and lighten.
About ACI. Founded in 1904 and headquartered in Farmington Hills, Michigan, USA, the American Concrete Institute is a leading authority and resource worldwide for the development and distribution of consensus-based standards, technical resources, educational & training programs, certification programs, and proven expertise for individuals and organizations involved in concrete design ...
ACI 233R-03 (R2011) Slag Cement in Concrete and Mortar. standard by American Concrete Institute, 01/01/2003. This document has been replaced. View the most recent version.
 “Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete”- ACI 233R-95.  “Combinations of pozzolonas and Ground, Granulated Blast Furnace Slag to from Hydraulic cement concrete”-D.S. Lane and Celik Ozyildirim [, from the Virginia Transportation Research Council, Virginia.